LS1 Electric Tip Lift

Hoist mounted roll handling equipment designed to quickly and safely lift and rotate a roll.

Power Requirements:

110 volts, 60 Hertz, single phase, 7 1/2 amps. Unit equipped with 6-conductor coiled SO Cable. 90 PSI required to power pneumatic tooth release (optional).

Speed:

Approximately 6 seconds per tip.

Tipping Restrictions:

Not to exceed 25 tips per hour.

Weight:

115 lbs with 3″ Standard Probe

Capacity:

See chart.

Probe:

All Tip Lifts probes are interchangeable. Probes Feature a patented design that prevents a roll from being released unless the weight of the roll is supported. This prevents unintentionally releasing the roll when the operator is not ready.

Handle Mounted Controls:

Handle mounted controls allow the operator to tip the roll, release the roll (if the unit has pneumatic tooth release) and control the hoist while keeping hands in a safe location.

Handle Mounted Controls

LS1 Electric Tip Lift Dimensions

LS1 Electric Tip Lift – Specs & Options

LS1 Electric Tip Lift Capacity
Roll Face Width 10″ 20″ 30″ 40″ 50″ 60″ 70″
Max Capacity 830 lbs. 510 lbs. 370 lbs. 290 lbs.  230 lbs. 200 lbs. 170 lbs.
Standard Probe Options
Type “A” “B”
3″ Standard 2.875″ 10.5″
3″ Short 2.875″ 6″
6″ Standard 5.875″ 10.5″
6″ Short 5.875″ 6″

*Custom Probes Available Upon Request

Manual Tooth Release

Manual Tip Lift Tooth Release

Pneumatic Tooth Release

Pneumatic Tip Lift Tooth Release